|
| |
TM 9-2320-364-20-3
2-2391
(1) Set multimeter select switch to ohms.
(2) Is there continuity between harness
connector MC 83, terminal C and
harness connector MC94, terminal B?
(a) If there is no continuity, repair wire
1486 (see schematic Fig 2-52) or
notify DS Maintenance.
(b) If there is continuity, wire 1486
is OK.
(3) Install LHS control assembly
(Para 7-40).
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|
