|
| |
TM 9-2320-364-20-4
3-3
b.
Fill.
Ensure engine oil drain hose plug is properly installed and engine is completely drained of oil.
Failure to comply may result in damage to equipment.
(1)
Open access door (1) on left side engine noise panel (2).
(2)
Remove engine fill tube cap (3) from engine fill tube (4).
(3)
Fill engine with oil in accordance with Lubrication Table 2-3, Para 2-9.
(4)
Install engine fill tube cap (3) in engine fill tube (4).
c.
Follow-On Maintenance:
Start and run engine for three minutes, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Shut OFF engine and allow oil to drain for 20 minutes, (TM 9-2320-364-10).
Check engine oil level and add engine oil as needed, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
