|
| |
TM 9-2320-364-20-4
5-9
(19)
Install muffler support bracket (12) on
radiator mounting screw (14).
(20)
Position locknut (13) on radiator mounting
screw (14).
(21)
Install washer (11), lockwasher (10),
screw (9) and muffler support bracket (12)
on muffler (8).
(22)
Tighten locknut (13) on radiator mounting
screw (14).
(23)
Install exhaust stack (3) and clamp (7) on
muffler (8) and re-latch clamp.
NOTE
Perform Steps (24) through (26)
only if installing a new clamp.
(24)
Tighten locknut (37) on clamp (7) to 20 to
30 lb-in (2 to 3 N.m).
(25)
Unlatch clamp (7) on muffler (8), then re-
latch clamp (7).
(26)
Tighten locknut (37) on clamp (7) to 50
lb-in (6 N.m).
NOTE
Perform Step (27) only if rain cap
was removed.
(27)
Install rain cap (6) on exhaust stack (3) with
screw (5) and nut (4).
(28)
Install aspirator hose (2) and clamp (1) on
exhaust stack (3) and tighten clamp (1).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Check for exhaust leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Install right side noise panel, (Para 17-26).
Install spare tire, (TM 9-2320-364-10).
Stow crane, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
