|
| |
TM 9-2320-364-20-4
7-192
7-53. REAR MARKER LIGHT ASSEMBLY REPAIR (CONT).
e.
Installation.
(1)
Position rear marker light assembly (4) on
truck (32).
NOTE
Perform Step (2) for both sides
of rear light bar assembly.
(2)
Lift and tilt bracket (31) and install shear
mount (30), two lockwashers (29) and
nuts (28) in bracket (31) and rear marker
light assembly (4).
(3)
Install rear bracket (15) with two
screws (26) and nuts (27) on rear marker
light assembly (4).
NOTE
All seven red marker lights
are installed the same way.
Perform Steps (4) through (8)
for rear marker light with
lamp.
Perform Steps (9) through
(13) for rear marker light
with LED.
(4)
Install gasket (14), rear marker light
assembly (8), two self-tapping screws (13),
wire 1435 (12) and two nuts (10) on rear
bracket (15).
|
