|
| |
TM 9-2320-364-20-5
17-46
Materials/Parts
Adhesive (Item 3, Appendix C)
Adhesive, Insulation (Item 12, Appendix C)
Insulation, Cab (Item 52, Appendix C)
Tape, Adhesive (Item 90, Appendix C)
This task covers:
a. Removal
c. Locations of Insulation Panels
e. Follow-On Maintenance
b. Installation
d. Specifications of Insulation Panels
INITIAL SETUP
Equipment Condition - Continued
Beacon bracket removed, (Para 19-9)
Cab dome light removed, (Para 7-49)
Seats removed, (Para 17-40)
Cargo net removed, (Para 17-43)
Seat belts removed, (Para 17-44)
Gas particulate filter unit (If equipped),
(Para 24-2)
Decontamination bracket removed
(If equipped), (Para 24-3)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
17-19. CAB INSULATION REPLACEMENT.
a.
Removal.
NOTE
Perform Step (1) if insulation is
held in place with retaining strips.
If not, start with Step (2).
(1)
Remove eight screws (1) and four retaining
strips (2) from insulation (3) and cab
shell (4).
NOTE
Insulation for floor is under cab
shell.
(2)
Remove insulation (3) from cab shell (4).
b.
Installation.
NOTE
Ensure that insulation panels
meet specifications of
drawings in Step d.
Ensure that insulation panel
fits section of cab shell to be
covered.
If insulation panel has
finished and rolled edges,
perform Step (1). If not, start
with Step (2).
(1)
Apply double-sided adhesive tape on back of
insulation panel along finished, rolled edge.
|
