|
| |
TM 9-2320-364-20-5
18-27
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(15)
Coat four screws (14) with sealing
compound.
(16)
Install bracket assembly (15) on plates (16) and (17) with four lockwashers (13), screws (14) and nuts (12).
(17)
Apply hydraulic oil to two preformed packings (10).
(18)
Install two preformed packings (10) and position hoist motor valve (9) on motor (11).
(19)
Apply sealing compound on threads of four screws (7).
(20)
Install four lockwashers (8) and screws (7) on hoist motor valve (9). Tighten screws to 15 to 17 lb-ft
(20 to 23 N.m).
(21)
Apply hydraulic oil to two preformed packings (3) and preformed packing (4).
(22)
Install two preformed packings (3) and
preformed packing (4) on two fittings (5)
and elbow (6).
NOTE
Install hoses as noted prior to
removal.
(23)
Install two hoses (1) and hose (2) on two
fittings (5) and elbow (6).
c.
Follow-On Maintenance:
Fill hydraulic reservoir,
(Para 2-9, Lubrication Table 2-3).
Check operation, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Load test crane, (TM 9-2320-364-34).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
