|
| |
TM 9-2320-364-20-5
20-6
20-2. MAIN HYDRAULIC PUMP DRIVESHAFT REPAIR (CONT).
Use care when installing
retaining rings. Retaining rings
are under spring tension and can
act as projectiles when released
and could cause severe eye
injury.
NOTE
Clips are properly installed when
seated in grooves in yoke.
(4)
Install two clips (15) in bracket (14).
(5)
Remove bracket (14) from vise.
(6)
Position slip yoke (2) in vise.
(7)
Position U-joint (11) in slip yoke (2).
Needle bearings may fall out
during assembly, use caution to
avoid damage to equipment.
(8)
Install bearing caps (12) and (13) on
U-joint (11), in slip yoke (2).
Use care when installing retaining
rings. Retaining rings are under
spring tension and can act as
projectiles when released and
could cause severe eye injury.
NOTE
Clips are properly installed when
seated in grooves in yoke.
(9)
Install two clips (10) in slip yoke (2).
|
