|
| |
TM 9-2320-364-20-5
21-174
21-34. CONTAINER HANDLING UNIT (CHU) STOW WELDMENT
REPLACEMENT (CONT).
NOTE
Stow hooks are not tightened
on stow weldment.
Stow hook should have an
even gap around lifting frame
pin.
(11)
Tighten six screws (6) and locknuts (7) on
two hooks (8) and stow weldment (9).
(12)
Verify lifting frame wear pad gap to LHS
hook arm is less than 1/8 in. (3.2 mm). If
not repeat Steps (6) through (11).
g.
Follow-On Maintenance:
Install rail transport corner ISO locks, (TM 9-2320-364-10).
Install container guides, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
8
6
7
9
|
