|
| |
TM 9-2320-364-20-5
21-175
21-35. CONTAINER HANDLING UNIT (CHU) LIFTING FRAME ASSEMBLY
REPLACEMENT.
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Lifting frame in 82 in. (208 cm) mode,
(TM 9-9-2320-364-10)
Lifting frame removed from truck,
(TM 9-2320-364-10)
Locking plate removed, (Para 21-36)
Lower container lock plate removed, (Para 21-37)
Flipper bracket and lock plate removed,
(Para 21-38)
Lifting frame strap removed, (Para 21-47)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Materials/Parts
Sealing Compound (Item 83, Appendix C)
Personnel Required
Two
a.
Removal.
NOTE
There are two slide arms. Both are removed the same way. Right side is shown.
Only remove wire ropes, swaging sleeves, pins and lock pins if components are damaged.
(1)
Remove pin (1), lock pin (2) and upper hook (3) from slide arm (4).
(2)
Remove two swaging sleeves (5) and wire rope (6) from pin (1) and lock pin (2).
1
2
3
4
5
6
5
|
