|
| |
TM 9-2320-364-34-2
4-23
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
Retaining ring is installed over
blower drive shaft alignment
tool to keep retaining ring from
falling into flywheel housing.
(23)
Install retaining ring (23) on blower
driveshaft (24) and remove blower driveshaft
alignment tool.
(24)
Remove clean rag from around driveshaft
hub (22).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(25)
Apply sealing compound to threads of
screw (41).
(26)
Install cushion clip (42), screw (41) and
nut (40) in bracket (43).
|
