|
| |
TM 9-2320-364-34-2
6-33
Materials/Parts
Grease (Item 25, Appendix B)
Oil, Lubricating (Item 38, Appendix B)
Sealing Compound (Item 56, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Lockplate (4) (Item 218, Appendix E)
Lockwasher (5) (Item 246, Appendix E)
Lockwasher (9) (Item 248, Appendix E)
Lockwasher (Item 286, Appendix E)
Packing, Preformed (2) (Item 370, Appendix E)
Packing, Preformed (Item 371, Appendix E)
Packing, Preformed (Item 403, Appendix E)
Packing, Preformed (3) (Item 404, Appendix E)
Screw (8) (Item 530, Appendix E)
Seal (Item 572, Appendix E)
This task covers:
a. Disassembly
c. Testing
b. Cleaning/Inspection
d. Assembly
INITIAL SETUP
Equipment Condition
Starter on clean work surface.
Tools and Special Tools
Tool Kit, General mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gage Set, Telescoping (Item 69, Appendix F)
Gloves, Chemical Oil Protective
(Item, 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Micrometer, Outside, Caliper Set
(Item 139, Appendix F)
Multimeter (Item 140, Appendix F)
Vise, Machinist’s (Item 248, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Hook, Wire, 6 in. (Appendix C)
6-4. STARTER REPAIR.
a.
Disassembly.
(1)
Remove nut (1), lockwasher (2) and ground
wire (3) from terminal No. 4 (4). Discard
lockwasher.
(2)
Remove nut (5), lockwasher (6) and ground
wire (3) from ground stud (7). Discard
lockwasher.
|
