|
| |
TM 9-2320-364-34-2
6-42
6-4. STARTER REPAIR (CONT).
NOTE
When properly installed,
bushing should be on stud as far
as it will go and preformed
packing should be flush with
housing.
(7)
Install preformed packing (35) on field coil
stud (9).
NOTE
Curved side of insulator faces
field ring; notched end faces
brush openings.
(8)
Install insulator (34), washer (33) and
nut (32) on field coil stud (9). Tighten nut
to 18 to 22 lb-ft (24 to 34 N.m).
NOTE
Perform Step (9) if bushing was
removed.
(9)
Install bushing (78) in shift housing (56).
(10)
Install oil seal (77) in shift housing (56).
|
