|
| |
TM 9-2320-364-34-2
6-48
6-4. STARTER REPAIR (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(43)
Coat threads of four screws (26) with
sealing compound.
(44)
Align matchmarks and install commutator
end housing (25) on field ring (15) with four
lockwashers (27) and screws (26). Tighten
screws to 62 to 66 lb-in (7 to 8 N.m).
(45)
Tighten nut (44) on ground stud (7) to 23 to
27 lb-ft (31 to 37 N.m).
(46)
Remove brush mounting screw (22) from
ground jumper (86).
(47)
Pull eight springs (19) upward and install
eight brushes (20) in four brush holders (21).
(48)
Install eight brush wires (24) on four brush
holders (21) with four lockplates (23) and
eight screws (22).
(49)
Install brush opening band (18) on field
ring (15) with two screws (17) and nuts (16).
|
