|
| |
TM 9-2320-364-34-2
9-25
(17)
Coat threads on tapered shaft of torque
rod (27) with lubricating oil.
(18)
Install tapered shaft of torque rod (27) in
Axle No. 2 (28).
NOTE
Tighten locknut only until
threads of locknut are fully
engaged with threads of torque
rod. Otherwise, other end of
torque rod will be difficult to
install.
(19)
Position washer (29) and locknut (26) on
torque rod (27).
NOTE
Install same number and size
spacers as noted during removal.
(20)
With the aid of an assistant, install
plate (32), spacers (34), bracket (33) and
end of torque rod (27) with two screws (31)
and locknuts (30).
(21)
Tighten locknut (26) on torque rod (27) to
175 to 225 lb-ft (237 to 305 N.m).
NOTE
To seat torque rod, strike torque
rod mount of axle with hammer.
(22)
Retighten locknut (26) on torque rod (27)
to 175 to 225 lb-ft (237 to 305 N.m).
(23)
Install air line 2420 (24) to fitting (25).
(24)
Install air line 2056 (22) to fitting (23).
|
