|
| |
TM 9-2320-364-34-2
9-26
9-4. AXLE NO. 2 ASSEMBLY REPLACEMENT (CONT).
(25)
Install air line 2874 (18), air line 2098 (17)
and air line 2544 (16) to elbows (21), (20)
and (19).
(26)
Install two air lines 2874 (14) to tee (15).
Adhesives, solvents, and
sealing compounds can burn
easily, can give off harmful
vapors, and are harmful to
skin and clothing. To avoid
injury or death, keep away
from open fire and use in
well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing, wash immediately
with soap and water.
Driveshafts can weigh up to
100 lbs (45 kg). Properly
support driveshafts when
removing screws. After
screws and brackets are
removed, driveshaft can fall
and cause serious injury to
personnel.
(27)
Coat threads of four screws (11) with
sealing compound.
(28)
Position driveshaft (10) in flange
assembly (13).
(29)
Install two brackets (12) and four
screws (11) in flange assembly (13).
Tighten screws 130 to 135 lb-ft (176 to 183
N.m).
|
