|
| |
TM 9-2320-364-34-2
9-27
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(30)
Coat threads of four screws (7) with sealing
compound.
(31)
Position driveshaft (6) in flange
assembly (9).
(32)
Install two brackets (8) and four screws (7)
in flange assembly (9). Tighten screws 55
to 60 lb-ft (75 to 81 N.m).
(33)
Install drag link (4) in steering arm (5) with
castle nut (3). Tighten castle nut to 165 to
180 lb-ft (224 to 244 N.m).
NOTE
It may be necessary to rotate
castle nut slightly to install cotter
pin.
(34)
Install cotter pin (2) in castle nut (3).
c.
Follow-On Maintenance:
Install brake drums, (TM 9-2320-364-20).
Install shock absorbers, (TM 9-2320-364-20).
Fill axle oil, (TM 9-2320-364-20).
Align suspension, (Para 12-8).
Adjust brakes, (TM 9-2320-364-20).
Install wheels/tires, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
Check operation, (TM 9-2320-364-10).
END OF TASK
|
