|
| |
TM 9-2320-364-34-3
16-49
NOTE
Install washer as noted during
removal.
(120)
Position two side wear pads (29) and
washers on inner-mid section (20).
(121)
Apply grease to two wear pads (29).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Wear pads are installed with taper
to outside.
(122)
Apply sealing compound to threads of
screws (27).
(123)
Install two rear wear pads (28) with
screws (27).
(124)
Apply grease to two wear pads (28).
Inner-mid section weighs
1000 lbs (454 kg). Attach
suitable lifting device prior to
installation to prevent possible
injury to personnel.
(125)
Attach lifting device on inner-mid
section (20).
|
