|
| |
TM 9-2320-364-34-3
16-55
(8)
Align tension cylinder (8) with holes in
boom assembly (4).
(9)
Coat pin (16) with anti-seize compound.
NOTE
Ensure hole in pin is straight up
and down.
(10)
Install pin (16) in mast valve base
mount (11).
(11)
Align mast valve base mount (11) with holes
in boom assembly (4).
(12)
Continue installing pin (16) just up to
erection cylinder (9).
NOTE
Ensure hole in pin aligns straight
up and down.
(13)
Lift end of erection cylinder (9) and align
with hole in boom assembly (4).
NOTE
Pin should stick out evenly on both
sides.
(14)
Finish installing pin (16) in erection
cylinder (9).
(15)
Apply sealing compound to threads of two
screws (12).
(16)
Install two lock pins (15) and bushings (14)
with washers (13) and screws (12).
Tighten screw to 135 lb-ft (183 N.m).
|
