|
| |
TM 9-2320-364-34-3
16-85
(4)
Remove nut (8), lockwasher (9), screw (10)
and cable clamp (11) from shaft (12).
Discard lockwasher.
(5)
Loosen cable (13) and operate lifting device
to rotate hoist assembly (1) slowly down.
(6)
Remove two screws (14), lockwashers (15),
washers (16) and proximity switch
assembly (17) from bracket (18). Discard
lockwashers.
(7)
Position proximity switch assembly (17) out
of way.
(8)
Reposition lifting device on hoist
assembly (1).
(9)
With the aid of an assistant, drive out
pin (19) from hoist assembly (1).
(10)
Lower hoist assembly (1) and remove from
hoist mount (7).
(11)
Remove lifting device from hoist
assembly (1).
NOTE
Perform Step (12) if bushings
are damaged.
(12)
Remove two bushings (20) from hoist
mount (7).
|
