|
| |
TM 9-2320-364-34-3
16-86
16-11. HOIST ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
NOTE
Perform Step (1) if bushings are
damaged.
(1)
Install two bushings (20) in hoist mount (7).
Hoist assembly weighs 210 lbs
(95 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
(2)
Wrap and attach lifting device around hoist
assembly (1).
(3)
With the aid of an assistant, align hoist
assembly (1) with hoist mount (7).
NOTE
Hole in shaft and hole in pin must
line up. Keep alignment during
installation.
(4)
With the aid of an assistant, maintain hoist
assembly (1) and hoist mounting bracket (7)
alignment while installing pin (19).
(5)
Install cable (13) and cable clamp (11) on
shaft (12) with screw (10), lockwasher (9)
and nut (8). Tighten screw to 17 lb-ft
(23 N.m).
|
