| |
TM 9-2320-364-34-3
16-268
16-41. LOAD HANDLING SYSTEM (LHS) MIDDLE FRAME TUBE REPLACEMENT
(CONT).
The LHS hydraulic system operates at oil pressures up to 3,625 psi (24,994 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury to personnel.
NOTE
Tag and mark all hoses prior to removal.
Cap and plug hydraulic hoses and tubes after removal.
Remove cable ties as required.
(10)
Remove two screws (7), lockwashers (8), washers (9), cover plates (10) and four clamps (11).
(11)
Remove screw (7), washer (9), cover plate (10), two clamps (11), hose 2891 (12) and hose 2881 (13)
from middle frame (1).
(12)
Remove adapter (14), preformed
packing (15), spacer (16), compression
ring (17) and nut (18) from tube (19).
Discard preformed packing.
|