|
| |
TM 9-2320-364-34-3
18-127
NOTE
There are three wires located on
24 volt terminal. Remove only
wire 1281A and position
remaining wires back on 24 volt
terminal.
(10)
Remove nut (24), lockwasher (25), washer
(26), washer(s) (27), if present, fuse link
(28) with insulator washer (29), wire
1281A (30) from 24 volt terminal (31).
Discard lockwasher.
(11)
Position fuse link (28) with insulator
washer (29), washer(s) (27), if removed,
washer (26) and nut (24) on 24 volt
terminal (31).
NOTE
There are two wires located on
12 volt terminal. Remove only
wire 1274 and position remaining
wire back on 12 volt terminal.
(12)
Remove nut (32), lockwasher (33), washer
(34) and wire 1274 (35) from 12 volt
terminal (36). Discard lockwasher.
(13)
Position nut (32) and washer (34) on 12
volt terminal (36).
(14)
Cut terminals off of wire 1274 (35) and
wire 1281A (30). Seal wire ends with
heatshrink and tie back exposed wires to
the harness.
29
28
30
33
32
35
34
25
24
27
26
36
31
|
