| |
TM 9-2320-364-34-4
20-262
20-76. FLYWHEEL HOUSING AND REAR OIL SEAL INSTALLATION (CONT).
(17)
Position three washers (16) and screws (17)
in flywheel housing (4).
(18)
Position four lockwashers (18) and
screws (19) in flywheel housing (4).
(19)
Apply grease to gasket (20).
(20)
Position gasket (20) and access cover (21)
in flywheel housing (4).
(21)
Install four lockwashers (22) and
screws (23) in flywheel housing (4).
(22)
Position copper washer (24) and screw (25)
in flywheel housing (4).
(23)
Apply grease to gasket (26).
(24)
Position gasket (26), access cover (27), washer (28) and screw (29) in flywheel housing (4).
(25)
Position two screws (30) in flywheel housing (4).
NOTE
Top left most screw will be installed with fuel block.
(26)
Position two screws (31), washers (32), lockwashers (33) and nuts (34) in flywheel housing (4).
(27)
Remove lifting device and lifting eyes.
|