|
| |
TM 9-2320-364-34-4
20-263
(28)
Tighten screws in sequence shown to specified torque.
(29)
Apply grease to gasket (35).
(30)
Install gasket (35), access cover (36), copper washer (37) and screw (38).
NOTE
Middle and bottom right two screws will be installed with air governor.
(31)
Install three screws (39).
(32)
Tighten screws (39) and (38) 30 to 35 lb-ft (41 to 47 N.m).
|
