|
| |
TM 9-2320-364-34-4
20-278
Materials/Parts
Grease (Item 21, Appendix B)
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Vibration damper and front balance cover
installed, (Para 20-82)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Bit Set, Screwdriver (Item 20, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
20-83. ENGINE OIL COOLER ASSEMBLY INSTALLATION.
Materials/Parts - Continued
Gasket (Item 65, Appendix E)
Gasket (Item 120, Appendix E)
Lockwasher (20) (Item 291, Appendix E)
Lockwasher (2) (Item 292, Appendix E)
Seal (Item 567, Appendix E)
Spring (Item 666, Appendix E)
Washer, Copper (Item 694, Appendix E)
a.
Installation.
(1)
Install gasket (31) and oil cooler
outlet elbow (30) with two screws (27),
lockwashers (29) and nuts (28). Tighten
screws 30 to 35 lb-ft (41 to 47 N.m).
|
