|
| |
TM 9-2320-364-34-4
20-301
(26)
Install SRS/TRS (25) in bracket (21) with
retaining clip (26) and screw (27). Do not
tighten.
NOTE
When properly adjusted, there
should be .018 - .022 in. (.46 -
.56 mm) between pulse wheel
teeth and the end of the sensor.
(27)
Position a .020 in. (.50 mm) feeler gage
between TRS (25) and the TRS pin on the
pulse wheel (23).
(28)
Slide the SRS/TRS (25) against feeler gage
and tighten screw (27).
(29)
Connect two connectors (28) to SRS/TRS
(25).
(30)
Remove screw (11), washer (10), clamp (9)
and dial indicator from right injector bore
(8).
b.
Follow-On Maintenance:
Install fuel injector, (Para 20-92).
END OF TASK
|
