|
| |
TM 9-2320-364-34-4
20-323
Materials/Parts
Grease (Item 21, Appendix B)
This task covers:
a. Assembly
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Right thermostat housing installed, (Para 20-100)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Handle, Installer (Item 93, Appendix F)
Installer, Seal (Item 116, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
20-101. LEFT THERMOSTAT HOUSING INSTALLATION.
Materials/Parts - Continued
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Gasket (Item 85, Appendix E)
Gasket (Item 86, Appendix E)
Lockwasher (4) (Item 292, Appendix E)
Seal (Item 566, Appendix E)
a.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat threads of plug (1) with sealing
compound.
(2)
Install plug (1) in left thermostat
housing (2).
(3)
Position seal ring (3) on installer and handle
and install seal ring (3) in left thermostat
housing (2).
(4)
Install thermostat (4) in left thermostat
housing (2).
|
