|
| |
TM 9-2320-364-34-4
20-326
20-102. ENGINE LIFTING BRACKETS INSTALLATION (CONT).
(8)
Repeat Steps (1) through (7) for left rear lifting bracket.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(9)
Coat threads of screws (1) and (2) with
sealing compound.
(10)
Position front lifting bracket (5) on front
balance cover (6) with lockwashers (3)
and (4) and screws (1) and (2).
(11)
Tighten screw (1) to 53 to 56 lb-ft
(72 to 76 N.m) and screw (2) to 103 to 106
lb-ft (140 to 144 N.m).
(12)
Tighten screw (1) 71 to 75 lb-ft
(96 to 102 N.m).
(13)
Tighten screw (2) 137 to 147 lb-ft
(186 to 199 N.m).
b.
Follow-On Maintenance:
Install turbocharger and air inlet housing, (Para 20-103).
END OF TASK
|
