|
| |
TM 9-2320-364-34-4
20-356
20-106. REMOVING ENGINE FROM STAND (CONT).
NOTE
If equipped with 200 AMP
alternator, perform Steps
(16) through (42).
If equipped with a 145 AMP
alternator, perform Steps
(43) through (65).
(16)
Install wire 1020B (114), washer (113) and
locknut (112) on terminal (115) of regulator
(116). Tighten locknut to 25 lb-in (3 N.m).
Adhesives, solvents, and sealing
compounds can burn easily can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(17)
Apply electrical sealant to terminal (115).
Alternator weighs 75 lbs. (34 kg).
Attach suitable lifting device prior
to installation to prevent possible
injury to personnel.
(18)
With the aid of an assistant, install lifting
device onto alternator and install alternator
(86) in alternator mounting bracket (78).
(19)
Install screw (77), washer (119), washer
(118), lockwasher (117) and nut (76) in
alternator mounting bracket (78) and
alternator (86).
(20)
Remove lifting device from alternator (86).
116
78
112
118
76
117
113
114
115
119
77
86
LIFTING
DEVICE
|
