| |
TM 9-2320-364-34-4
20-357
(21)
Position alternator bracket (89), lockwasher
(110) and screw (109) on engine (111).
(22)
Install wire 1815 (108), lockwasher (107)
and screw (106) on alternator (86).
(23)
Tighten screw (106) to 17 lb-ft (23 N.m).
(24)
Remove nut (97), washer (99), washer(s) (if
present) (100), and fuse link (101) with
insulator washer (102) from 24 volt terminal
(105).
(25)
Install wire 1953 (104), wire 1820 (103), fuse
link (101) with insulator washer (102),
washer(s) (if removed) (100), washer (99),
lockwasher (98) and nut (97) on 24 volt
terminal (105).
(26)
Tighten nut (97) to 15 lb-ft (20 N.m).
(27)
Remove nut (92) and washer (94) from 12
volt terminal (96).
(28)
Install wire 1860 (95), lockwasher (93),
washer (94) and nut (92) on 12 volt terminal
(96).
(29)
Tighten nut (92) to 15 lb-ft (20 N.m).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(30)
Apply electrical sealant to 12 volt terminal
(96), 24 volt terminal (105) and screw (106).
97
99
101
100
98
103
102
104
92
94
95
93
109
110
89
111
108
107
106
105
96
86
|