|
| |
TM 9-2320-364-34-4
23-27
b.
Disassembly.
Do not force separator plate
from control valve. Damage
to key hole slots in separator
plate will result.
Valve body assembly
contains springs which can
be interchanged easily by
mistake. If springs are not
installed in correct
positions, calibration of
valve body functions will be
lost.
(1)
With separator plate (1) facing upward,
place control valve body (2) on clean work
surface.
(2)
Locate two key hole slots and flared head
pins in separator plate. Slide separator
plate (1) across control valve body (2) so
flared heads of pins move into larger part of
key hole slots. Remove and discard
separator plate (1) from control valve
body (2).
NOTE
Note and record color and
location of all springs.
(3)
Remove directional priority valve (3),
priority valve spring (4) and priority valve
stop (5) from control valve body (2).
Discard spring.
|
