|
| |
TM 9-2320-364-34-4
23-41
e.
Installation.
Keep outer face of stator
assembly down to prevent
bearings and springs from
falling out.
Stator must turn freely in
clockwise direction and
lockup in counterclockwise
direction. Failure to ensure
this may result in improper
operation and damage to
equipment.
(1)
Install stator (1) on shaft (2). Align splines
on shaft. Check that stator turns freely in
clockwise direction and locks up in
counterclockwise direction.
f.
Follow-On Maintenance:
Install flywheel and torque converter turbine, (Para 7-10).
END OF TASK
|
