|
| |
TM 9-2320-364-34-4
23-61
(29)
Install two guide pins in opposing holes in
oil pump (10).
(30)
With the aid of an assistant, turn torque
converter housing (1) on side.
NOTE
Make sure seal ring remains
properly positioned on oil pump
when installing oil pump in
torque converter housing.
(31)
With the aid of an assistant, install oil
pump (10) in torque converter housing (1).
(32)
Position four screws (11) in oil pump (10).
(33)
Position torque converter housing (1) on
level surface.
(34)
Remove guide pins from oil pump (10).
(35)
Install remaining two screws (11) in oil
pump (10).
(36)
Tighten six screws (11) in oil pump (10) in
sequence shown to 36 to 43 lb-ft (49 to 58
N.m).
|
