|
| |
TM 9-2320-364-34-4
23-62
23-12. TORQUE CONVERTER HOUSING REPAIR (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Perform Steps (37) and (38) only if plugs were removed.
(37)
Apply sealing compound to threads of four
plugs (6).
(38)
Install four plugs (6) in torque converter
housing (1).
(39)
Install temperature sending unit (7) in
torque converter housing (1). Tighten to 50
to 60 lb-in (6 to 7 N.m).
(40)
Apply hydraulic oil to two preformed
packings (3).
(41)
Install two preformed packings (3) on
elbows (2).
NOTE
Install elbows as noted prior to
removal.
(42)
Install two elbows (2) in torque converter
housing (1).
(43)
Apply hydraulic oil to preformed
packing (5).
(44)
Install preformed packing (5) on straight
fitting (4).
(45)
Install straight fitting (4) in torque
converter housing (1).
|
