|
| |
TM 9-2320-364-34-4
23-98
23-16. CENTER SUPPORT REPAIR (CONT).
(10)
Turn center support (4) over.
(11)
Apply hydraulic oil to preformed
packings (8) and (9).
NOTE
Lips of preformed packings face
away from springs.
(12)
Install inner preformed packing (8) and
outer preformed packing (9) in third clutch
piston (10).
Install third clutch piston slowly
in center support or damage to
preformed packings may occur.
(13)
Lubricate center support (4) with hydraulic
oil.
(14)
Install third clutch piston (10) in center
support (4).
(15)
Install 20 springs (11) in third clutch
piston (10).
(16)
Install spring retainer plate (12) in third
clutch piston (10).
NOTE
Spring retainer plate must be
compressed evenly to sit
properly in center support.
(17) Using lock ring installer, install four push-on
nuts (13) in third clutch piston (10).
|
