|
| |
TM 9-2320-364-34-4
27-24
27-4. INTERMEDIATE STEERING GEAR REPAIR (CONT).
(20)
Remove actuating shaft (25) and bearing
cap (18) from piston assembly (19).
(21)
Remove ring (26) and preformed
packing (27) from piston assembly (19).
Discard ring and preformed packing.
(22)
Remove preformed packing (28) from
bearing cap (18). Discard preformed
packing.
(23)
Using a drill press and a 5/64 in. drill, drill
one in. (2.54 mm) deep through retaining
pin (29) in bearing cap (18). Discard
retaining pin.
(24)
Remove bearing retainer (30) from bearing
cap (18) and actuating shaft (25).
18
29
1"
|
