PAINTING. -725550625

TM 9-2330-385-14

c. For exterior cleaning of frame and structural components, use soap solution (Item 21, Appendix E).

Leave application on items surface for approximately ten minutes before rinsing. Rinse with hot or cold water

under pressure. If available, use hot water under 80 to 120 lb (36 to 54 kg) pressure. An ordinary garden hose may be

used if no other equipment is available. If pressurized water supply is not available, wash painted surfaces with a soap

solution (Item 21, Appendix E) and water.

d. Electrical parts such as coils, connectors, switches and insulated wiring, should not be soaked or sprayed with

cleaning solutions. Clean these parts with a clean, dry cloth (Item 11, Appendix E) moistened with drycleaning

solvent P-D-680 (Item 22, Appendix E).

Instructions for preparation of material to paint, how to paint and material to be used are in TM 43-0139. Instruction

for camouflage painting are contained in FM 20-3. Stenciling and marking military vehicles are listed in TB 43-0209.

Data plate location and description is listed in Chapter 2.

Refer to PMCS, Para 4-8, Table 4-1 for lubrication procedures and requirements for the trailer. The instructions

include types and grades of lubricant used, lube points, locations and frequency of the required lubrication.

4-335