REAR MARKER LIGHTS/BRACKET REPLACEMENT.

TM 9-2330-385-14

4-28. REAR MARKER LIGHTS/BRACKET REPLACEMENT.

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Tool Kit, General Mechanic's: Automotive

Tags, Identification (Item 23, Appendix E)

Locknut (6) (Item 31, Appendix I)

Goggles, Industrial (Item 13, Appendix J)

Lockwasher (4) (Item 51, Appendix I)

Materials/Parts

Equipment Condition

Cable Ties (Item 8, Appendix E)

Wheel chocked, (Para 2-20)

Silicone Compound, Anti-Corrosion

Intervehicular power cable disconnected,

Removal.

NOTE

If only replacing lamp, perform Steps (1) and (2).

Tag and mark all wires before removal.

Remove cable ties as required.

All three running lights removed same way.

Ground wire removed only on center lamp.

(1)

Remove two screws (1) and lens (2) from lens support (3).

(2)

Remove lamp (4) from lamp socket (5).