Alignment. -725551013

TM 9-2330-385-14

NOTE

Center of axle spindle covers are marked with an indentation.

(3)

Drop a plumb bob (6) from center of spindle cover (7) on Axle No. 2 (4) and mark on floor where it

touches.

(4)

Repeat Step (3) for opposite side of Axle No. 2 (4).

(5)

Drop a plumb bob (6) from center of spindle cover (7) on Axle No. 3 (5) and mark on floor where it

touches.

(6)

Repeat Step (5) for opposite side of Axle No. 3 (5).

NOTE

If distance A and B are within 1/16 in. (1.59 mm) of each other alignment is correct, go to

Step (14). If not, perform Step (7).

(7)

With the aid of an assistant, measure distance between marks from Axle No. 2 (4) and Axle No. 3 (5) on

floor using a tape measure.

NOTE

If distance A and B are not within 1/16 in. (1.59 mm) of each other Axle No. 3 requires

adjustment. Perform Steps (8) through (14).

5-59