 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
(6)
Remove cotter pin (7), castle nut (8),
washer (9), pin (10) and spring hanger (11)
from bracket (12).
NOTE
Perform Step (7) if grease fittings
were damaged.
(7)
Remove grease fitting (13) from pin (10).
Discard grease fitting.
(8)
Repeat Steps (1) through (7) for opposite
side front spring.
b.
Installation.
(1)
Install spring hanger (11), pin (10),
washer (9), castle nut (8) and cotter pin (7)
on bracket (12). Tighten castle nut to 160
lb-ft (217 N.m).
(2)
Align slot in nut (8) with hole in pin (10).
(3)
Install cotter pin (7) in pin (10).
NOTE
Perform Step (4) if grease fittings
were removed.
(4)
Install grease fitting (13) on pin (10).
Spring weighs 163 lbs
(74 kg). Attach suitable
lifting device prior to
installation to prevent
possible injury to personnel.
Keep hands and fingers out
of spring pin hole or injury
to personnel may result.
(5)
With the aid of an assistant, attach lifting
device and raise spring (1) into position.
5-77
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals