Follow-On Maintenance: -725551032

TM 9-2330-385-14

5-22. SPRING REPLACEMENT (AXLE NO. 1) (CONT).

NOTE

Front of spring has a double loop around spring bushing. Ensure spring is installed

correctly.

Do not install front pin all the way in. There must be enough room between pin and

drawbar mount to install the castle nut.

(6)

Install two pins (5), washers (4) and castle

nuts (3) in spring (1) ends. Tighten castle

nuts to 160 lb-ft (217 N.m).

(7)

Align slot in castle nut (3) with hole in

pin (5).

(8)

Install cotter pin (2) in pin (5).

NOTE

Perform Step (9) if grease fittings

were damaged.

(9)

Install new grease fittings (6) in pins (5).

(10)

Remove lifting device from spring (1).

(11)

Repeat Steps (1) through (10) for opposite

side front spring.

Follow-On Maintenance:

Install axle, (Para 5-14).

Lubricate fittings, (Para 4-8).

Remove wheel chocks, (Para 2-20).

END OF TASK

5-78