SPRING ASSEMBLY REPLACEMENT (AXLES NO. 2 AND 3).

TM 9-2330-385-14

5-23. SPRING ASSEMBLY REPLACEMENT (AXLES NO. 2 AND 3).

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Tools and Special Tools

Materials/Parts

Tool Kit, General Mechanic's

Locknut (8) (Item 27, Appendix I)

Locknut (8) (Item 28, Appendix I)

Jackstand (6) (Item 24, Appendix J)

U-bolt (4) (Item 86, Appendix I)

Multiplier, Torque (Item 29, Appendix J)

U-bolt (2) (Item 87, Appendix I)

Socket Set, 3/4 in. (Item 39, Appendix J)

Personnel Required

Wrench, Torque (0-600 lb-ft [0-814 N.m])

Two

Lifting Device Minimum Capacity 8000 lbs

Equipment Condition

(3632 kg)

Front wheels chocked, (Para 2-20)

Rear wheels removed (Axles No. 2 and 3),

Materials/Parts

Bushing, Rubber (Item 10, Appendix I)

Liner Pad (Item 21, Appendix I)

Removal.

Rear of the trailer weighs approximately 8,000 lbs (3,632 kg). Attach suitable lifting device

prior to lifting or lowering frame to prevent possible injury or death to personnel.

NOTE

Both rear springs are removed the same way.

(1)

Support suspension hanger assembly (1) on jackstands.