 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
(7)
Position top plate (16) on spring
assembly (10).
(8)
Install two U-bolts (14) around top
plate (16) and spring assembly (10).
(9)
Install lower trunnion block (15), eight
washers (13) and four nuts (12) on
suspension hanger assembly (1). Tighten
nuts to 880 lb-ft (1193 N.m).
(10)
Position two rubber pads (11) and cap spring
seat (5) on spring assembly (10).
(11)
Position two U-bolts (8) around Axle
No. 2 (9) and through cap spring seat (5).
(12)
Position four washers (7) and locknuts (6)
on U-bolts (8).
(13)
Position four screws (4), washers (3) and
locknuts (2) through cap spring seat (5).
(14)
Refer to Para 5-17 and 5-18 and align
Axles No. 2 and 3.
(15)
Tighten four locknuts (2) on screws (4) to
180 lb-ft (244 N.m).
(16)
Tighten four locknuts (6) on U-bolts (8) to
300 lb-ft (407 N.m).
5-83
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals