ASSEMBLY AND PREPARATION FOR USE.

TM 9-3990-206-14&P

Section II. OPERATION UNDER USUAL CONDITIONS

7-8. ASSEMBLY AND PREPARATION FOR USE.

Unpacking. Refer to Para 9-4, Unpacking and Packing, for unpacking instructions.

b. Assembly and Installation. Refer to Chapter 9, Loose Parts Installation, for assembly and installation

instructions, including removal of rollers from stowage points. Refer to Sideboard Kit and Cargo Tarp

Installation and Removal Instructions, Paras 7-11 and 7-12 if sideboards, straps and cargo tarp must be installed.

7-9. UNLOCK AND LOCK TWIST LOCKS.

Unlock Twist Locks.

NOTE

Sliding handle may be used from Basic Issue Items (BII) to rotate twist lock.

Right and left pin assemblies are operated the same way. Front and rear pin assemblies are

operated the same way. Left front shown.

(1)

Rotate locking handle (1) of twist lock (2) approximately 1/8 turn in either direction.

(2)

Rotate twist lock (2) backwards from stowage position.

Lock Twist Locks.

(1)

Rotate twist lock (2) into stowage position.

(2)

Rotate locking handle (1) of twist lock approximately 1/8 turn in either direction to lock twist lock in

stowage position.