DRAFT
TB 9-2320-364-13&P-1
AC CONDENSER MOUNTING BRACKET REPLACEMENT - Continued
REMOVAL
PLSAC001
NOTE
Wheel chocks and wooden blocks are placed on top of battery box cover to support
condenser while condenser mounting bracket is being replaced.
If wheel chocks are not available, use similar size material to support condenser. Support
needs to be approximately 5.75 by 15.5 by 15.5 in.
1. Position two wheel chocks (1) on top of battery box cover (2).
PLSAC002
NOTE
Wooden blocks used in Step 2 should be 2 by 4 by 16 in.
2. Position two wooden blocks (3) on top of two wheel chocks (1).
0027-2