DRAFT
TB 9-2320-364-13&P-1
AC CONDENSER MOUNTING BRACKET REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC003
4. Secure condenser mounting bracket (7) to panel (13) with two washers (12) and screws (11).
5. Install support bar (10) on condenser mounting bracket (7) with screw (9) and locknut (8).
WARNING
AC condenser assembly weighs 75 lbs. (34 kg). Do not lift AC condenser assembly
without the aid of an assistant. Failure to comply may result in injury to personnel
and/or damage to equipment.
CAUTION
When installing condenser on condenser mounting bracket, two hoses and wire
harness must be carefully tucked into the cutouts in panel. Failure to comply may
result in damage to equipment.
6. With the aid of an assistant, install condenser (6) on condenser mounting bracket (7) with four
screws (5).
7. Tighten locknut (4).
0027-7