TB 9-2320-364-13&P-1
4.
Install brace (8) and sampling valve
bracket (5) on power module frame (6)
with two screws (9) and locknuts (10).
5.
Loosen locknut (11).
6.
Install elbow (12) on fitting (2).
7.
Install transmission oil sample line (1)
on elbow (12).
8.
Tighten locknut (11).
9.
Remove fuel return line (13) from
fitting (14).
NOTE
Nut and washer removed in Step (10) will
need to be retained and reused in Step (11)
with new screw.
10. Remove nut (15), washer (16), screw (17) and
fuel block (18) from flywheel housing (19).
0055-11
