TB 9-2320-364-13&P-1
CAUTION
Fuel supply line must be inboard and over the leg on the compressor mounting bracket that attaches
to the transmission. Fuel return line must be outboard of compressor mounting bracket. Failure to
comply may result in damage to equipment.
NOTE
Verify that the holes on the compressor mounting bracket line up with the two holes drilled in
Step (32) and with the two holes on the transmission. Some slight grinding may be needed to get
holes to line up properly.
33. With the aid of an assistant, install compressor mounting bracket (52) on cradle support (56) with two
screws (57), washers (58), lockwashers (59) and nuts (60).
34. Secure compressor mounting bracket (52) to transmission (32) with two screws (61) and lockwashers (62).
Tighten two screws (61) to 54-65 lb-ft (73-88 Nm).
0055-16