TB 9-2320-364-13&P-1
24. Route ground branch of wire harness (7) to starter relay (34).
NOTE
Remove sealant from screw before installing wire on starter relay.
Reapply sealant after installing screw and wire on starter relay.
25. Install wire (35) of wire harness (7) on starter relay (34) with existing screw (36).
26. Route hose 2521 (18), hose 2522 (3) and wire harness (7) under transmission sampling valve hose (37).
NOTE
Hose 2521, hose 2522 and wire harness will not be attached to condensor until the condensor is
installed.
27. Position hose 2521 (18), hose 2522 (3) and wire harness (7) on top of battery box cover (38).
0055-25
0055-25/(0055-26 blank)