TB 9-2320-364-13&P-1
NOTE
Bracket, part number 3535264, will be used as a template to mark holes on panel for drilling in
Step (5).
Position bracket, part number 3535264, on panel so that hose openings point up and side of
bracket with four mounting holes facing rear of vehicle.
Position bracket, part number 3535264, so that seven mounting holes are 1 in. (25.4 mm) from
bottom edge of panel (1), and right hand most hole is located 8.875 in. (225.4 mm) from rear of
panel (1).
5.
With the aid of an assistant, using bracket (4) as template, mark and drill seven 3/8 in. (9.53 mm) holes (5)
and (6) in panel (1).
6.
Install five nutserts (7) in holes (5) on panel (1).
7.
Using template 3535371, align holes on template
with two holes (6) and cut out two openings (8)
on panel (1).
8.
File off rough edges on cutouts made in Steps (1)
and (7).
9.
Paint edges on cutouts made in Steps (1) and (7)
as required.
0055-29